After having bought the firearm of your choice, the next question that comes to mind is – what steps should one take to maintain it?

Cleanliness is one of the most important parts of maintaining a firearm, so here we present to you some of the best ultrasonic cleaners on the market today.

Ultrasonic cleaners are much preferred to cleaning a gun by hand; not only are they significantly safer but also much more thorough in cleaning. If you own a collection or a set of antiques, you’ll definitely want to consider laying down the money on one of these.

So, if you’re in the market for one of the best ultrasonic gun cleaners, read along to check out our top 5 picks.

5 Best Ultrasonic Cleaner for Guns

1. Tek Motion Stainless Steel Ultrasonic Cleaner (15L)

Standout Features

6 industrial grade ultrasonic transducers which clean thoroughly.

Allows you to preset cleaning time from 1 to 30 minutes.

Most compact offering, best for smaller firearms and small components.

1 Year Warranty.

Product Benefits

For those with smaller firearms, this will prove to be a boon. Out of all the products featured here, this is the smallest. It offers all the cleaning power one can need, regardless of size. This cleaner can heat up pretty quickly, and cleaning takes very little time.

It is not recommended to clean for more than 30 minutes, since it might damage the internal circuitry and your items. Depending on the state of the items, you may have to go in for multiple cleanings. It is best used with the cleaning agent of your choice.

The durable stainless steel body is bound to give you years of trouble-free usage. For those suited to the imperial system, the heater settings are in degrees Celsius; you will have to convert to Fahrenheit regularly. Also, it can get slightly noisy.

Pros & Cons

Compact size.

Preset size and temperature options.

Strong cleaning power.

Can get noisy at times.

2. Ultrasonic Cleaner by Homgrace (30L)

Standout Features

40 KHz strengthened transducer.

600 W cleaning power and 500 W heating power.

Can heat to 80 degrees Celsius, up to 99 minutes.

Auto standby feature to prevent overheating.

Product Benefits

This cleaner offers a good all-round experience. It can easily accommodate larger gun parts at once, and even multiple smaller parts. The strong heating and cleaning power ensure that cleaning gets done faster and better.

The strengthened transducer and durable body are sure to serve you long. You can clean large handguns with ease. This is an industrial-power ultrasound cleaner, so if you are in the habit of cleaning your firearms regularly, this is a no-nonsense pick.

Further, this comes with 10 transducers, so you are unlikely to keep on repeatedly cleaning dirtier surfaces. It can clean the toughest of dirt traces, with the cleaning solution of choice, quite quickly. Adjustability in terms of temperature and timing are also high for maximum convenience.

Pros & Cons

Strengthened transducer cleans quickly.

Highly adjustable time and temperature.

Celsius temperature setting may be difficult to use for those accustomed to Fahrenheit.

3. Large Ultrasonic Carburetor Cleaner with Heating, by DK Sonic (30L)

Standout Features

Adjustable ultrasound frequency – 28 KHz (semi wave) and 40 KHz (full wave).

Special “Degas” mode to remove residual bubbles.

Automatic temperature cutoff if heater exceeds preset value

Special heavy duty SUS304 stainless steel construction.

Product Benefits

If you own a larger handgun (perhaps a semi-automatic), and make sure your firearm(s) do not get dirty all that easily, the 28KHz setting is sufficient. If desired, you can clean extra dirty surfaces with the 40 KHz setting.

This unit scores high on features and convenience, since you can skip 10 minutes or 10 degrees Celsius at once to adjust the time or temperature. There is also a dedicated “Degas” cleaning mode which maximises cleanliness by reduction of residual bubbles for the toughest of surfaces.

The special material gives a sense of reassurance towards its long term ability to keep working without fail. This cleaner is definitely one for the long run!

Pros & Cons

Feature-packed and convenient.

Quite sturdy, made of comparably better quality stainless steel.

Inverted sense of buttons gets confusing in initial use (increasing is downwards and decreasing is upwards).

4. Stainless Steel Industrial Ultrasonic Cleaner by Mophorn (30L)

Standout Features

Superior 800 W cleaning power and 600 W heating power.

Little to none solvent requirement for most cleaning tasks.

Independent controls for timer and temperature.

Auto standby and stop functions.

Product Benefits

This is easily a solid pick for those requiring frequent and more excessive cleaning. The 800W cleaner is sure to clean all kinds of soiled surfaces with relative ease.

The cleaner works well for most gun cleaning uses, though it is quite noisy (a consequence of all the raw power, no less). There is sadly no power adjustment, which means you’re stuck with 800W power all the time. This is overkill for everyone but those whose firearms tend to require greater time to be cleaned.

The 600W heating power gets it to temperature fairly quickly. Thus, the auto standby and stop features come in handy for cutting off supply for temperatures which are higher than indicated.

Pros & Cons

800W cleaning is the strongest available in among competitors

Durable, easy to use.

Components make a lot of noise due to the powerful transducers.

5. Professional Digital Control Ultrasonic Cleaner by Messier Industrial (30L)

Standout Features

Modern design and ergonomics.

Ships with a user manual in English to aid operation.

Works at both 110V-220V and 50-60 KHz voltage.

Built using the benchmark SUS304 stainless steel.

Product Benefits

If aesthetics are a consideration while buying a cleaner, this is one of the best designs on the market. The digital readouts for time and temperature are easy to read. The finish on the stainless steel body is impeccable.

Cleaning is done with the industry standard 600W/10 transducer arrangement. This is powerful enough to clean a soiled handgun in one go. We recommend cleaning for a duration of 30 minutes at around 50 degrees Celsius (112 degrees Fahrenheit) temperature.

The 500W heater takes care of getting the water up to the temperature you seek. The user panel also comes with a novel tilt option, which allows you to adjust the settings without having to bend. Overall, this makes for a solid, user friendly addition to your cleaning arsenal.

Pros & Cons

20 degree tilt option for the settings panel.

Modern design, solid construction.

Makes a buzzing noise which can become disorienting if used for a longer duration.

Wrapping it Up

There a ton of choices on the market when it comes to ultrasonic cleaners. Cleaning a gun by hand takes a lot of time, and for multiple guns, the time investment is immense. Ultrasonic cleaners are a solid investment since they can be used to clean small gun parts and handguns at once, with ease.

Durability, ease of use, and cleaning power should be at the top of your checklist when it comes to procuring a cleaner. In case you’re stuck on making a decision, the ones listed above are among the best offerings on the market. You are sure to enjoy years of problem-free cleaning with any of them, rest assured.